Rev. Proc. 83-26
Rev. Proc. 83-26; 1983-1 C.B. 693
- Cross-Reference
26 CFR 601.602: Forms and instructions.
(Also Part I, Sections 402, 408, 1232, 3402, 6041, 6042, 6043, 6044,
6047, 6049, 6050A, 6050B, 1.6041-1, 1.6042-2, 1.6044-2, 1.6047-1,
1.6049-1, 1.6050A-1, 7.6041-1, 31.3402(q)-1.)
- LanguageEnglish
- Tax Analysts Electronic Citationnot available
Superseded by Rev. Proc. 84-70 Supplemented by Rev. Proc. 83-49
PART A. GENERAL
Section 1. Purpose
.01 The purpose of the revenue procedure is to state the requirements for reproducing paper substitutes of the following forms:
(a) Form 1099-ASC, Statement for Recipients of Interest on All-Savers Certificates.
(b) Form 1099-B, Statement for Recipients of Proceeds from Broker and Barter Exchange Transactions (the revenue procedure will be supplemented to add these requirements).
(c) Form 1099-DIV, Statement for Recipients of Dividends and Distributions.
(d) Form 1099-G, Statement for Recipients of Certain Government Payments.
(e) Form 1099-INT, Statement for Recipients of Interest Income.
(f) Form 1099-MISC, Statement for Recipients of Miscellaneous Income.
(g) Form 1099-OID, Statement for Recipients of Original Issue Discount.
(h) Form 1099-PATR, Statement for Recipients (Patrons) of Taxable Distributions Received From Cooperatives.
(i) Form 1099R, Statement for Recipients of Total Distributions from Profit-Sharing, Retirement Plans, and Individual Retirement Arrangements.
(j) Form W-2G, Statement for Certain Gambling Winnings
.02 For the purpose of this revenue procedure, a substitute form is one which does not totally conform to the specifications set forth. Payee copies are not to be considered substitute forms. Only Copy A data need be approved.
.03 This revenue procedure supersedes Rev. Proc. 82-5, 1982-1 C.B. 406.
Sec. 2. Nature of Changes
.01 New return types, Forms 1099-B and 1099-G, have been added. The Form 1099-B with Optical Character Recognition (OCR) specifications will be added by a supplement to the revenue procedure.
.02 The following return types have been deleted: Form 1099-BCD; Form 1099-F; Form 1099-L; Form 1099-MED; Form 1099-NEC; Form 1099-UC; Form 1087-ASC; Form 1087-DIV; Form 1087-INT; Form 1087-MED; Form 1087-MISC; Form 1087-OID.
.03 Substitute form format requirements for Forms 1099-DIV and 1099-INT are revised to facilitate processing by Optical Character Recognition (OCR) equipment.
.04 Various Editorial Changes.
Sec. 3. Application for Approval of Substitute Forms 1099 and W-2G, Copy A.
.01 Paper substitutes for Forms 1099 and W-2G which totally conform to the specifications contained in this procedure may be privately printed without prior approval from the Internal Revenue Service.
.02 Proposed substitutes not conforming to these specifications, must be submitted by payers for consideration to:
Commissioner of Internal Revenue
Attn: D:R:R:I
1111 Constitution Ave., N.W.
Washington, DC 20224
These requests should contain a copy of the proposed form, the need for the specific deviation(s), and the volume of information returns affected.
.03 Forms 1099 and W-2G are subject to annual review and possible change. Payers are cautioned, therefore, against overstocking supplies of the privately printed substitutes.
.04 Copies of the official forms for the reporting year may be obtained from most Internal Revenue Service offices. The Service provides only cut sheets (no carbon interleaves) of these forms.
.05 Only original or ribbon copies may be filed with the Internal Revenue Service. Carbon copies and reproduced copies are not acceptable.
Sec. 4. Definitions
.01 The term "taxpayer (recipient) identifying number (TIN)" for an individual means the social security number (SSN). The SSN consists of nine-digits separated by hyphens as follows: 000-00-0000. For all other payees, the term "taxpayer (recipient) identifying number" means employer identification number (EIN). The EIN consists of nine-digits separated by one hyphen as follows: 00-0000000.
.02 The terms Payee and Recipient are usually synonymous. The name of the appropriate payee (i.e. person or organization whose TIN has been provided) must be shown as the first entry in the area on the form provided for the payee's name and address. No descriptive information or other individual's name are to precede the payee's name. ONLY ONE payee name should appear. If more are needed, place the responsible payee (person or organization who will report the income for tax purposes) on the first line. Place other payees on succeeding lines.
.03 A Corrected and/or Amended return is one which corrects previously reported information.
Sec. 5. Instructions
.01 Recipient name, street address, city, state, and ZIP Code information must be on separate lines. It is preferred that the city, state, and ZIP Code be on the same line.
.02 The area below the payee's name and address may be used for the account designation number. This information is not required; however, special caution must be taken if an account designation number is being printed. This number must not appear in the "Recipient's Identifying Number" box, the payment amount boxes, or on the same lines as the payee's name and address.
.03 The Service requests that payers type or machine print data entries on the forms (i.e. use black ribbon, insert data in the middle of blocks well separated from other printing and guidelines), and take other measures to guarantee a clear, sharp image. Payers are not required, however, to acquire special equipment solely for the purpose of preparing these forms.
.04 On corrected returns, an "X" must be placed in the check box in the left 1/2 inch margin following the "format identifier number" (e.g., Form 1099-ASC, 84). The words CORRECTED RETURN must be typed in all caps in the top 1/4 inch, right-of center margin. All required data blocks must be completed on a corrected return since it replaces and supersedes the information return previously filed. This section does not apply to the forms specified in Part C.
.05 Substitute forms prepared in continuous or strip form must be burst and stripped to conform to the size specified for a single form before they are filed with the Service.
Sec. 6. Taxpayer Identification Numbers
.01 Under Section 6109 of the Internal Revenue Code, recipients of dividends, interest, or other payments are required to furnish taxpayer identification numbers (TINs) to the payer. The number must be furnished to the payer whether or not the payee is required to file a tax return or is covered by Social Security. Section 6109 also requires payers to request recipient TINs and furnish such on returns filed with the Service.
.02 Payers are expected to provide correct TINs on all documents submitted. It is particularly important that correct social security and employer identification numbers for payees be provided on magnetic media or paper forms submitted to the Service.
.03 For each omission of a required TIN, Section 6676 of the Internal Revenue Code provides that the Service charge a $50 penalty, unless the payer or payee responsible for furnishing the TIN supplies an explanation, upon request from the Service, that establishes reasonable cause for not having done so.
.04 The TIN to be furnished the Service depends primarily upon the manner in which the account is maintained on the record of the payer. The TIN to be provided must be that of the owner of record. If the account is recorded in more than one name, furnish the TIN and name of one of the holders of the record. The TIN provided must be that of the recipient provided in the first name line. The payee TIN is the recipient's SSN for individuals (including those individuals operating a business as a sole proprietorship) or the recipient's EIN for other entries.
.05 Sole proprietors who are payers should show their EINs as a Payer; however, the payer should use the SSN of a sole proprietor when a payee.
.06 The charts below will help you determine the TIN to be furnished to the Service.
Chart 1. Guidelines for Social Security Numbers
In the Payee 1st
Name Line of the
For Payee TIN enter Payee Portion of
For this type the Social Security the Return Enter
of account Number of the Name of
-----------------------------------------------------------------
1. An individual's The individual. The individual.
account.
2. Joint account of: The actual owner of The individual whose
a. husband and wife. account. (If more SSN is entered.
than one owner, the
principal owner.)
b. adult and minor. The actual owner of The individual
the account. (If whose SSN is
more than one entered.
owner, the principal
owner.)
c. two or more The actual owner of The individual
individuals. the account. (If whose SSN is
more than one entered.
owner, the principal
owner.)
3. Account in the The ward, minor, or The individual whose
name of a guard- incompetent person. SSN is entered.
ian or committee
for a designated
ward, minor, or
incompetent per-
son.
4. Custodian account The minor. The minor.
of a minor (Uniform
Gifts to Minor Act).
5. a. The usual revo- The grantor-trustee. The grantor-
cable savings trustee.
trust account
(grantor is also
trustee).
b. So-called trust The actual owner. The actual owner.
account that is
not a legal or
valid trust under
State law.
6. Sole proprietorship. The owner. The owner.
Chart 2. Guidelines for Employer Identification Numbers
In the Payee 1st
Name Line of the
For Payee TIN enter Payee Portion of
For this type the Employer Identi- the Return Enter
of account fication Number of the Name of
-----------------------------------------------------------------
1. A valid trust, Legal entity. The legal trust,
estate, or pension estate, or
trust. pension trust.
2. Corporate account. The corporation. The corporation.
3. Religious, chari- The organization. The organization.
table, or educa-
tional organization.
4. Partnership account The partnership. The partnership.
held in the name
of the business.
5. Association, club, The organization. The organization.
or other tax-exempt
organization.
6. A broker or regis- The broker or nominee. The broker or
tered nominee. nominee.
7. Accounts with the The public entity. The public entity.
Department of Agri-
culture in the name
of a public entity
(such as a State or
local government,
school district, or
prison that receives
agriculture program
payments.)
Sec. 7. Magnetic Media Filing
.01 The Service encourages payers or nominees (hereafter collectively referred to as payers) with computer capability to file information returns on magnetic media instead of paper forms. All forms listed in Sec. 1.01, except Forms W-2G may be filed on magnetic media. Specifications for filing information returns on tape, disk, or diskette are contained in revenue procedures, relating to Magnetic Tape Recording for Information Returns, Disk Pack Reporting for Information Returns, and Diskette Reporting for Information Returns. Copies of these procedures may be obtained from any Internal Revenue Service district office or service center. Payers or agents who want to file information returns on magnetic media must file an application, Form 4419, with the service center which normally receives the paper forms.
.02 Since many states accept information returns filed on magnetic media, savings may be obtained if similar media is used for filing with the Service and state tax agencies. For information regarding state magnetic media filing requirements, payers should contact the individual state tax authority.
PART B SUBSTITUTE FORM FORMAT REQUIREMENTS (EXCLUDING FORMS 1099-DIV AND FORMS 1099-INT)
Section 1. General
.01 The following specifications prescribe the format requirements of Forms 1099 and W-2G--COPY A ONLY, excluding Form 1099-DIV and Form 1099-INT. (See Part C for Form 1099-INT and Form 1099-DIV specifications.)
.02 Copies sent to Recipients need only (a) list all information needed to complete tax returns, (b) list all applicable payee instructions provided for on the Official Internal Revenue Service formats, (c) meet local, state, etc. requirements, (d) contain the OMB number prescribed on the Official Service format, and (e) tell the payee(s) that the information is being furnished to the Service.
.03 A payer may file a substitute Form 1099 or W-2G with the Service (hereafter referred to as substitute Copy A). Substitute forms submitted to the Service must be exact replicas of the official forms with respect to layout and contents. Only the dimensions of the substitute form may differ and the printing of the Government Printing Office symbol must be deleted.
.04 Color and Quality of Paper.
1 Paper for Copy A must be white chemical wood bond, or equivalent, 20 pound (basis 17 x 22-500), plus or minus 5 percent. The paper must consist of principally bleached chemical woodpulp and be free from unbleached or ground woodpulp or recycled printed paper. It also must be suitably sized to accept ink without feathering.
2 Copies B (For Recipient) and C (For Payer) are provided in the official assembly solely for the convenience of the payer. Payers may choose the format, design, color and quantity of the paper used for these copies.
.05 Color and Quality of Ink--All printing must be in a high quality non-gloss black ink. Bar codes should be free from picks and voids.
.06 Typography--Type must be substantially identical in size and shape with corresponding type on the official form. All rules on the document are either 1-point (0.015 inch) or 3-point (0.045). Vertical rules must be parallel to the left edge of the document; horizontal rules, parallel to the top edge.
.07 Dimensions--The official form is 8 inches wide x 32/3 inches deep, exclusive of a 1/2 inch snap stub on the left side of the form. The snap feature is not required on substitutes. If the substitute forms are in continuous or strip form, they must be burst and stripped to conform to the size specified for a single form before they are filed with the Service.
1 The width of a substitute Copy A must be a minimum of 7 inches and a maximum of 8 inches, although adherence to the size of the official form is preferred. If the width of the Substitute Copy A is reduced from that of the official form, the width of each field, except the left margin and the "For Official Use Only" area, on the substitute form must be reduced proportionately. The left margin must be 1/2 inch and free of all printing other than that shown on the official form. The area marked "For Official Use Only" must be 3 inches.
2 The depth of a substitute Copy A must be a minimum of 31/3 inches and a maximum of 32/3 inches. If the depth is reduced from that of the official form, the margin area at the top of the form marked "Official Use Only" must be 1/2 inch in depth by three inches in width.
.08 Clear Area--The back of Copy A must be free of all printing.
.09 Carbonized forms or "spot carbons"--Carbonized forms and "spot carbons" are not permissible. Interleaved carbons, if used, must be of good quality to preclude smudging and should be black.
.10 Printer's Symbol--The Government Printing Office symbol must not be printed on substitute Forms 1099 or W-2G. In place thereof, the printer's Employer Identification Number should appear in the same place on such substitute forms.
.11 Other Copies--Copy B and C are included in the official assembly for the convenience of the payer. Although there is no requirement that privately printed substitute forms include these copies, Copy B will satisfy the requirement of law and regulations concerning the statement of information which is required to be furnished the payee. Copy C may be desired as a payer record/copy.
Sec. 2. Additional Instructions
.01 Arrangement of Assembly--Except as provided in paragraph .02 below, the parts of the assembly shall be arranged, from top to bottom, as follows: Copy A (Original), "For Internal Revenue Service Center", Copy B, "For Payee" (Form 1099-OID for Record Owner), Copy C, "For Payer's Record" (1099-OID for Record Owner).
.02 Additional Copies--Additional copies may be prepared by payers for states REQUIRING THE REPORT. When this is done, one such copy may be inserted between Copies A and B. Forms for delivery to state or local taxing authorities should be clearly labeled to indicate the purpose for which they are intended and should not bear the Internal Revenue Service form number or the designation, "Department of the Treasury, Internal Revenue Service".
.03 Reproduction Proofs--Order blanks for reproduction proofs are mailed annually to requestors of record, and to other users upon request. Printers and others wishing to obtain reproduction proofs may send their requests to:
Internal Revenue Service
Attn: Distribution Manager
PM:S:FM:P--Room 1528
1111 Constitution Avenue, N.W.
Washington, D.C. 20224
A charge of $1.00 per printed page will be made for each reproduction proof regardless of page size. Invoices will be made after orders are filled.
Sec. 3. OMB Requirements
.01 Office of Management and Budget (OMB) Requirements for Substitute Forms--Pub. L. 96-511 requires: (1) OMB approval of Internal Revenue Service tax forms, (2) that each form show (in the upper right corner) the OMB approval number and any expiration date, and (3) the form (or its instructions) state why the Service is collecting the information, how we will use it and whether it must be given to us. The official Service forms will contain this information.
As it applies to substitute Service forms this means:
1. All substitute forms must show the OMB number and any expiration date as they appear on the official Service form.
2. The OMB number (and date) must use one of the following formats:
a. OMB No. XXXX-XXXX (preferred)
or
OMB #XXXX-XXXX
b. OMB No. XXXX-XXXX (preferred) Expires XXXXXX (mmddyy)
or
OMB #XXXX-XXXX Expires XXXXXX (mmddyy)
c. OMB No. XXXX-XXXX Expires XXXXXX (mmddyy) (preferred)
or
OMB #XXXX-XXXX Expires XXXXXX (mmddyy)
3. You must inform the users of your substitute forms of the reasons for Service collection, use and requirements, as stated in the instruction for the Service form.
4. The official OMB approval numbers (and expiration date) may be obtained from reproduction proofs, official Service printed forms, or when approval is requested for a substitute form.
PART C--SUBSTITUTE FORM FORMAT REQUIREMENTS FOR FORMS 1099-DIV AND 1099-INT
Section 1. General
.01 The following specifications prescribe the format requirements of Forms 1099-DIV and 1099-INT (Copy A).
.02 Copies sent to Recipients need only (a) list all information needed to complete tax returns, (b) list all payee instructions provided for on the Official Internal Revenue Service formats, (c) meet local, state, etc. requirements, (d) contain the OMB number prescribed on the Official Service format, and (e) tell the payee(s) that the information is being furnished to the Service.
.03 Paper substitutes conforming to the specifications contained in this revenue procedure may be privately printed without the prior approval of the IRS. Proposed substitutes not conforming totally to these specifications must be submitted by letter to the Commissioner of Internal Revenue, Attention: D:R:R:I, 1111 Constitution Ave., N.W., Washington, DC 20224, for consideration. These requests should contain an explanation of the specific need for the deviations and the number of Forms 1099-DIV or 1099-INT to be printed.
.04 Forms 1099-DIV and 1099-INT are subject to annual review and possible change. Payers are cautioned against overstocking supplies of privately printed substitutes.
.05 Copies of the official form for the reporting year may be obtained from any Service office. The Service provides only three part snap sets with no carbon interleaves for Forms 1099-DIV and 1099-INT.
.06 The form identifying number "9191" for Forms 1099-DIV or "9292" for Forms 1099-INT must be in the same location as it appears on the official reproduction proofs. The ballot box located to the left of the form identifying number must be a 10-point box.
Note: If the ballot box is checked indicating a corrected return, more than 50% of the box must be covered by an "X". Do not type "CORRECTED RETURN" on the top of the form. However, all required data must be completed on the corrected form since it replaces and supersedes the information return previously filed.
.07 The recipient's name must be aligned with the arrow when preparing the Forms 1099-DIV or 1099-INT.
Sec. 2. Specifications for Copy A of Forms 1099-DIV and 1099-INT
.01 The substitute form must be an exact replica of the official reproduction proof with respect to layout and contents. Chemical transfer paper and "spot carbons" are not permitted for Copy A. The printing of the Government Printing Office (GPO) symbol must be deleted. The specifications for the Copy A of substitute Forms 1099-DIV and 1099-INT are provided in Exhibits A, B, C and D respectively.
.02 Color and quality of paper.
Paper for Copy A (cut sheets and continuous pinfeed forms) as specified by JCP 0-25, dated November 29, 1978, must be: White 100% bleached chemical wood, optical character recognition (OCR) bond produced in accordance with the following specifications:
NOTE: Reclaimed fiber in any percentage is permitted, provided the requirements of this standard are met
1 Acidity: pH value, average, not less than ______________ 4.5
2 Basis Weight 17 x 22 500 cut sheets ____________________ 20
Metric equivalent--g/m2 ________________________________ 75
A Tolerance of +/-5 pct. shall be allowed.
3 Stiffness: Average, each direction, not less
than--milligrams _______________________________________ 50
4 Tearing strength: Average, each direction,
not less than--grams _________________________________ 40
5 Opacity: Average, not less than--percent _______________ 82
6 Thickness: Average--inch _____________________________ 0.0038
Metric equivalent--mm ________________________________ 0.097
A tolerance of +0.0005 inch (0.0127 mm) shall be allowed.
Paper shall not vary more than 0.0004 inch (0.0102 mm) from
one edge to the other.
7 Porosity: Average, not less than--seconds ______________ 10
8 Finish (smoothness): Average, each side--seconds ______ 20-55
For information only, the Sheffield equivalent--
units _____________________________________________ 170-100
9 Dirt: Average, each side, not to exceed--parts
per million __________________________________________ 8
.03 All printing will be in blue OCR dropout ink, as specified, except for the form identifying numbers appearing to the right of "Copy A" on the official Internal Revenue Service form and the descriptive information at the bottom (see Exhibits C and D) which will be printed in nonreflective black ink. All other printings will be in blue OCR dropout ink with or comparable to the specifications below. The screened area of any substitute form should generally correspond to that present on the official form. Separation between fields must be 0.1 inch including screen. Horizontal screening should follow the standard format and allow for typewriter spacing. All screened areas are to be printed in the blue OCR dropout ink. The numbered captions are printed as a solid with no screened background. The blue OCR dropout ink must be Sinclair-Valentine J-27973 or an exact match.
.04 Typography--Type must be substantially identical in size and shape with corresponding type on the official form. All rules on the Forms 1099-DIV or 1099-INT are either 3-point, 1-point or 3/4-point. Rules must be identical to that on the official form. NOTE: The form identifying number must be in OCR B font.
.05 Dimension--Three official Forms 1099-DIV or 1099-INT (Copy A) are contained on a single page which is 8 inches wide (exclusive of any snap-stubs) by 11 inches deep. The top margins and the right margin must be 1/4 inch plus or minus .0313 inch and must be free of all printing.
.06 The depth of the individual image on a page must be the same (32/3 inches) as that of the official reproduction proof.
.07 Perforations are required on all copies (except Copy A) to enable the separation of individual forms.
.08 The words "For Paperwork Reduction Act Notice and instructions on completing this form, see Instructions for Form 1096" must be printed on the Copy A and Copy C (for the Payer).
.09 The OMB Number must be printed on each ply of Form 1099-DIV or 1099-INT in the same location as on the official form.
.10 Privately printed continuous substitute Forms 1099-DIV or 1099-INT (Copy A) must be perforated at each 11" (3-on) page depth. No perforations are allowed between the 32/3" forms on a single copy page of Copy A.
.11 The words "DO NOT CUT or Separate Forms on this Page" must be printed in blue dropout ink between the three Forms 1099-INT or 1099-DIV. NOTE: Perforations are required between all the other individual copies (Copy B and C) included in the set.
.12 The back of a substitute Copy A must be free of all printing.
.13 Carbonized. "Chemical transfer paper" and "spot carbons" are not permitted for Copy A. Interleaved carbon must be of good quality to assure legibility of information on all parts to preclude smudging, and should be black.
.14 Printer's symbol--The GPO symbol must not be placed on substitute Copy A. In the place of the GPO symbol, the Employer Identification Number (EIN) of the forms printer must be printed in the bottom margin on the face of each individual form of Copy A.
Sec. 3. Additional Instructions
.01 Arrangement of Assembly--
--Copy B and C are included in the official assembly for the convenience of the payer. Although there is no requirement that privately printed substitute forms include these copies, Copy B will satisfy the requirement of law and regulations concerning the statement of information which is required to be furnished the payee. Copy C may be desired as a payer record/copy.
.02 Additional Copies--Additional copies may be prepared by payers for states REQUIRING THE REPORT. When this is done, one such copy may be inserted between Copies A and B. Forms for delivery to state or local taxing authorities should be clearly labeled to indicate the purpose for which they are intended and should not bear the Internal Revenue Service form number or the designation, "Department of the Treasury, Internal Revenue Service".
.03 Reproduction Proofs--Order blanks for reproduction proofs are mailed annually to requestors of record, and to other users upon request. Printers and others wishing to obtain reproduction proofs may send their requests to:
Internal Revenue Service
Attn: Distribution Manager
PM:S:FM:P--Room 1528
1111 Constitution Avenue, N.W.
Washington, D.C. 20224
A charge of $1.00 per printed page will be made for each reproduction proof regardless of page size. Invoices will be made after orders are filled.
Sec. 4. OMB Requirements
(see Part B, Section 3)
Sec. 5. Effect on Other Revenue Procedures
Rev. Proc. 82-5 is superseded.
[Editor's note: Exhibits A through D illustrate physical specifications of the forms discussed. These illustrations are not suitable for electronic reproduction.]
- Cross-Reference
26 CFR 601.602: Forms and instructions.
(Also Part I, Sections 402, 408, 1232, 3402, 6041, 6042, 6043, 6044,
6047, 6049, 6050A, 6050B, 1.6041-1, 1.6042-2, 1.6044-2, 1.6047-1,
1.6049-1, 1.6050A-1, 7.6041-1, 31.3402(q)-1.)
- LanguageEnglish
- Tax Analysts Electronic Citationnot available
![](https://s3.amazonaws.com/binary.taxnotes.com/image/tnr-video-placeholder.png)